--
Water is a valuable resource that many people take for granted, yet it has a finite quantity like every other natural resource on the planet. After washing machines and toilets, showers are usually the third-most major source of water usage in a home.
Switching from a high-flow shower head to a low-flow one can save approximately 7000 gallons of water per year for a family of two. Furthermore, technological advances in creating high-pressure, water-saving showerheads mean you don’t have to sacrifice shower quality.
You can save more than simply water.
Water heating contributes to over 18% of the average energy cost, making it the second-largest contribution. Reducing the amount of hot water you use in the shower will lower your energy bills and save you money.
People are attempting to be more aware of their impact on the environment than ever before. The environmental movement has aided in preserving the environment’s health and beauty, but it has also had some other positive outcomes.
Environmental awareness has prompted the development of environmentally friendly technology that aids users in reducing their environmental footprint. One such technology is eco-friendly showerheads. Environmentally friendly showerheads are designed to use less water and reduce the water and energy costs connected with showering.
Some consumers are concerned about the reduced flow from a water-saving showerhead, believing that their showers will be less enjoyable due to the reduced flow. Eco-friendly showerheads are designed to disperse water more evenly and fully despite the reduced volume. The result is a relaxing shower that also helps to protect the environment.
The showerhead controls the water flow and sprays pattern. They come in various forms and sizes, and the design can directly impact how much water is used. Think about the following factors before you make a purchase:
● Place a 2-litre container on the shower floor to see if you can reduce your water usage. When the shower is turned on full, it takes less than 12 seconds to fill, equal to 10 litres every minute. If this is the case, a low-flow or water-saving showerhead may be beneficial.
● A huge, permanent shower head is difficult to replace with a new, more environmentally friendly one. Because the water is scattered across a broader area, it can also make a shower feel less strong.
● Aerating shower heads combine water and air, lowering the water required.
● To save water, other water-saving showerheads lower the flow rate, ‘pulse’ the water or include a flow regulation built into the shower hose.
Electric showers are frequently not compatible with green showerheads. Eco shower heads with built-in flow regulators help you save water by limiting water flow. On the other hand, restricting water flow might cause water to accumulate in the heater tank, causing the shower to overheat. As a result, manufacturers frequently warn against using environmental shower heads with electric showers, which may cause the shower unit to malfunction. If you’re unsure, contact the manufacturer.
Because electric showers are already water efficient, you shouldn’t need to use an eco-shower head with one.
Much of the water used in showers is wasted, ending up in sewer treatment plants that take large amounts of energy to treat. Taking shorter showers not only conserves water but will also save you the energy that would otherwise be used to treat freshwater and sewers.
Installing an eco-friendly showerhead plumbing modification saves money in a variety of ways. For starters, you’ll save money on your water bills thanks to lower water and sewer taxes. Second, you’ll see a drop in your utility rates due to lower water heating and softening costs.
Because water heaters and softeners can be expensive to run, limiting the amount of water they treat will lower their energy expenses, saving you money in the long term.
1. Bath and shower mixers
The hose and spray are hooked to your bath in this shower style. The taps control the temperature and amount of water, allowing greater control over how much water you consume. This is advantageous since it enables you to reduce pressure and temperature, saving both energy and water.
2. Electric shower
An electric shower is essentially a water heater that heats cold water rapidly as it runs toward the showerhead. When you don’t need such a forceful shower, several feature environmental modes that reduce pressure, saving both energy and water. We test every eco mode for water flow and energy utilisation as part of our testing. Those with suitable eco modes are revealed in our electric shower reviews.
3. Manual mixer showers
The hose and spray come out of a wall unit, and there’s a temperature control that combines the hot and cold water supply in this popular and cost-effective shower. It may be difficult to precisely and rapidly adjust the pressure and temperature settings to save water and energy, so consider this before purchasing.
4. Power showers
Power showers are equipped with an electric pump that allows you to control the pressure and temperature of the water. This is the most water-intensive shower style, and it can fast consume more water than a bath.
There are a variety of water-saving devices available that track how long you’ve been in and how much water you’ve used, as well as notify you when you’ve been in for too long.
Your water company may also provide you with complimentary water-saving shower accessories. These are some of them:
● a shower flow regulator that attaches to the shower hose’s bottom
● Shower timers in the shape of an egg that sticks to the shower wall with a suction cup.
Check with your water company to see if it offers any freebies.
- Limit your showers to five minutes or less. Time them to see how long they usually take you and use a water-saving timer that alerts you when you’ve used more than 35 litres.
- Do not leave the shower running unattended. Try not to take a shower before getting in. Keep your shower at your favourite temperature as much as possible, so you don’t have to alter it before using it.
- Change the strength of your shower. We all want a forceful shower, but consider whether you can live with one that isn’t quite as powerful. One of the most effective strategies to save water and energy is simply utilising a lower setting.
- Repair any drippings The water drips from a dripping shower accumulates over time. Make sure it’s corrected to avoid wasting water.
- You can buy a stop button separately and install it yourself if your shower does not already have one. Amazon has a shower shutoff valve that you can try.
- Install an aerator to reduce water usage by introducing air into the stream.
